NEC NP3151W - Manual (Page 63)

49
Disabling the Security
1. Press the MENU button.
the menu will be displayed.
NOTE: Immediately after the projector has been turned on and the “PROJECTOR IS LOCKED! ENTER YOUR KEYWORD.” mes-
sage is displayed at the bottom of the screen, pressing the MENU button will display the Keyword entry will be displayed. At
this time, pressing the MENU button will display the menu.
2. Press the SELECT  button to highlight [SETUP] and press the ENTER button.
the page tab [BasiC] will be highlighted.
3. Press the SELECT  button twice to highlight the page tab [INSTALLATION(2)].
4. Press the SELECT  button three times to highlight [SECURITY SETTINGS] and press the ENTER but-
ton.
5. Press the SELECT  button four times to highlight [SECURITY] - [SETTINGS] and press the ENTER but-
ton.
the Keyword entry screen will be displayed
6. Press the ENTER button.
the software keyboard will be displayed.
7. Use the same procedures as steps 1 to 8 described in the “Turning on the Security function by assigning
a keyword for the first time” section to enter “1234”.
each time one number is entered, an “ ” (asterisk) will appear. Keyword appears as asterisks so the real key-
word is hidden.
8. After entering your keyword, highlight [OK] and press the ENTER button.
the software keyboard will disappear. the security screen will be displayed.
9. Highlight [ON] and press the SELECT  button to highlight [OFF].
10. Press the SELECT  button to highlight [OK] and press the ENTER button.
the security function will be disabled when the projector is turned on next time.
NOTE: Do not forget your keyword. However, if you forget your keyword, NEC or your dealer will provide you with your Release
Code upon proof of ownership.
4. Convenient Features