NEC NP3151W - Manual (Page 71)

5
4. Convenient Features
2. Press the SELECT  or  button to select [NETWORK] and press the ENTER button.
in the screen, the [netWOrK] menu is displayed.
3. From the [NETWORK] menu, select [NETWORK PROJECTOR].
the [PrOJeCtOr naMe/disPlaY resOlUtiOn/PassWOrd/Url] will be displayed.
TIP:
• To change the default password “1234”, select [CHANGE] and press the ENTER button.
The [ENTER PASSWORD] screen will be displayed, Enter a numeric password. The password must be eight characters or less.
The changed password stored in the projector will be displayed in the [NETWORK PROJECTOR] screen next time.
Changing the resolution of Windows Vista screen to the information on [DISpLAY RESOLUTION]
in the NETWORK pROJECTOR screen.
• When using Windows Vista Service Pack 1(SP1), skip the following steps and go on to "Projecting the Image with Network
Projector" on the next page.
1. Click [Start] from the desktop of Windows Vista.
2. Click [Control Panel].
3. Click [Adjust screen resolution] displayed under [Appearance and Personalization].