End points. see, To set up this, Ab vpn tunnel – NETGEAR DG834GSP User Manual

Page 133

Advertising
background image

Reference Manual for the ADSL Modem Wireless Router DG834GSP

Virtual Private Networking

8-21

v1.0, June 2007

How to Set Up a Gateway-to-Gateway VPN Configuration

Follow this procedure to configure a gateway-to-gateway VPN tunnel using the VPN Wizard.

Set the LAN IPs on each DG834GSP to different subnets and configure each properly for the
Internet. The examples below assume the following settings:

Note: This section uses the VPN Wizard to set up the VPN tunnel using the VPNC

default parameters listed in

Table 8-2 on page 8-5

. If you have special requirements

not covered by these VPNC-recommended parameters, refer to

“How to Set Up

VPN Tunnels in Special Circumstances” on page 8-38

to set up the VPN tunnel.

Figure 8-17

A

B

VPN Tunnel

DG834G VPN
Firewall

DG834G VPN Firewall

PCs

PCs

192.168.0.1

192.168.3.1

14.15.16.17

22.23.24.25

10.1.1.1

192.168.0.1

208.32.25.25

14.15.16.17

Advertising