NETGEAR DG834GSP - Manual (Page 194)

Reference Manual for the ADSL Modem Wireless Router DG834GSP
B-20 NETGEAR VPN Configuration
v1.0, June 2007
c. Select Secure in the Connection Security check-box group.
d. Select IP Subnet in the ID Type menu.
e. In this example, type 10.1.1.1 in the Subnet field as the network address of the
DG834GSP.
f. Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the DG834GSP.
g. Select All in the Protocol menu to allow all traffic through the VPN tunnel.
h. Select the Connect using Secure Gateway Tunnel check box.
i. Select Domain Name in the ID Type menu below the check box and enter
fromDG834G.com (in this example).
j. Select Gateway Hostname and enter ntgr.dyndns.org (in this example).
k. The resulting Connection Settings are shown in Figure B-16 .
3. Configure the Security Policy in the 54 Mbps ADSL Modem Wireless Router Model
DG834GSP software.
a. In the Network Security Policy list, expand the new connection by double clicking its
name or clicking on the “+” symbol. My Identity and Security Policy subheadings
appear below the connection name.
Figure B-16