NETGEAR DG834GSP - Manual (Page 24)

Reference Manual for the ADSL Modem Wireless Router DG834GSP
2-8 Introduction
v1.0, June 2007
The Router’s Front Panel
The front panel shown below contains status LEDs.
You can use the LEDs to verify various conditions. Table 2-1 describes each LED.
Figure 2-1
Table 2-1. LED Descriptions
Label Activity Description
1. Power
On
Off Power is supplied to the router.
Power is not supplied to the router.
2. Test
On
Off The system is initializing.
The system is ready and running.
3. Internet
On -- Green
Blink -- Green
On -- Amber
Blink -- Amber
Off
The Internet port is connected and an Internet session is in progress.
If the IP or PPPoE session is dropped due to an idle timeout, the light
will remain green. If the session is dropped for any other reason, the
LED color will change to amber.
Data is being transmitted or received by the Internet port.
The ADSL port is synchronized with your ISP’s DSLAM but there is
no Internet session.
The ADSL port is in the process of synchronizing with the your ISP’s
DSLAM.
No link is detected on the ADSL port.