NETGEAR DG834GSP User Manual
Page 134
Reference Manual for the ADSL Modem Wireless Router DG834GSP
8-22
Virtual Private Networking
v1.0, June 2007
Follow this procedure to configure a gateway-to-gateway VPN tunnel using the VPN Wizard.
1. Log in to the DG834GSP on LAN A at its default LAN address of http://10.1.1.1 with its
default user name of
admin
and password of
password
. Click the VPN Wizard link in the
main menu to display this screen. Click Next to proceed.
Table 8-4. VPN Tunnel Configuration Worksheet
Connection Name:
GtoG
Pre-Shared Key:
12345678
Secure Association -- Main Mode or Manual Keys:
Main
Perfect Forward Secrecy -- Enabled or Disabled:
Disabled
Encryption Protocol -- DES or 3DES:
3DES
Authentication Protocol -- MD5 or SHA-1:
SHA-1
Diffie-Hellman (DH) Group -- Group 1 or Group 2:
Group 2
Key Life in seconds:
28800
(8 hours)
IKE Life Time in seconds:
3600
(1 hour)
VPN Endpoint
Local IPSec ID
LAN IP Address
Subnet Mask
FQDN or Gateway IP
(WAN IP Address)
DG834GSP_A
GW_A
10.1.1.1
255.255.255.0
14.15.16.17
DG834GSP_B
GW_B
192.168.0.1
255.255.255.0
208.32.25.25
Note: The LAN IP address ranges of each VPN endpoint must be different. The
connection will fail if both are using the NETGEAR default address range of
10.1.1.x.