Connect automatically, as required, Connect automatically, as required -3 – NETGEAR DG834GSP User Manual
Page 99
Reference Manual for the ADSL Modem Wireless Router DG834GSP
Advanced Configuration
7-3
v1.0, June 2007
2. From the Main Menu, under Advanced, click the WAN Setup link to view the page shown:
3. Select the Default DMZ Server check box.
4. Type the IP address for that server.
5. Click Apply to save your changes.
Connect Automatically, as Required
Normally, this option should be enabled, so that an Internet connection will be made automatically,
whenever Internet-bound traffic is detected. If this causes high connection costs, you can disable
this setting.
If disabled, you must connect manually, using the sub-screen accessed from the "Connection
Status" button on the Status screen.
If you have an "Always on" connection, this setting has no effect.
Figure 7-1