NETGEAR DG834GSP User Manual
Page 158
Advertising
Reference Manual for the ADSL Modem Wireless Router DG834GSP
8-46
Virtual Private Networking
v1.0, June 2007
5. Click Apply. The Get VPN Policies web page is displayed.
6. Repeat for the DG834GSP on LAN B and pay special attention to use the following network
settings as appropriate.
•
General, Remote Address Data (e.g., 14.15.16.17)
•
Remote LAN, Start IP Address
— IP Address (e.g, 10.1.1.1)
— Subnet Mask (e.g., 255.255.255.0)
— Preshared Key (e.g., 12345678)
7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
Figure 8-41
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
“Activating a VPN Tunnel” on page 8-29
for information on the other ways.
Advertising