NETGEAR DG834GSP User Manual
Page 201
Reference Manual for the ADSL Modem Wireless Router DG834GSP
NETGEAR VPN Configuration
B-27
v1.0, June 2007
c.
Type ping -t 10.1.1.1, and then click OK.
This will cause a continuous ping to be sent to the VPN router. After between several
seconds and two minutes, the ping response should change from timed out to reply.
Once the connection is established, you can open the browser of the PC and enter the LAN IP
address of the VPN router. After a short wait, you should see the login screen of the VPN router
(unless another PC already has the VPN router management interface open).
Figure B-23
Figure B-24
Note: You can use the VPN router diagnostic utilities to test the VPN connection from the
VPN router to the client PC. Run ping tests from the Diagnostics link of the VPN
router main menu.