NEC XT5000 - Manual (Page 19)

E – 19
Reflecting The Image
Using a mirror to reflect your projector's image enables you to enjoy
a much larger image in a much smaller space. Contact your dealer if
you need a mirror.
If you're using a mirror and your image is inverted, use the [Main
Menu]
→
[Projector Options]
→
[Setup]
→
[Orientation] to select
the correct orientation.
(See page E-39.)
Rear Screen Projection
You can use your XT5000 to project an image from the rear onto a
transparent screen. The projection distance is the same for both rear
and front projection. Contact your dealer if you need a transparent
screen.
If you're projecting the image from the rear and your image is in-
verted, use the [Main Menu]
→
[Projector Options]
→
[Setup]
→
[Orientation] to access to correct the orientation. (See page E-39.)
Stack Projection (up to three units)
The MultiSync XT5000 can be stacked without any additional fram-
ing (gravity stacking). One unit can be stacked on top of the other up
to three units.
Make sure that each foot is securely seated on the stacking pad.
NOTE: See next page for more details.
Screen
Screen
Normal projection
Lens shifted
Top View
Side View
Normal projection
Lens shifted
Screen center