NEC XT5000 - Manual (Page 37)

E – 37
Select one of the following three levels for reducing video noise.
Low, Medium or High.
NOTE: The lower the Noise Reduction level, the better the image
quality. Increasing Noise Reduction lowers video bandwidth.
Color Matrix
Noise Reduction
First, select an appropriate color matrix for your input signal, either
HDTV or SDTV. Then select an appropriate matrix type from B-Y/R-
Y, Cb/Cr, Pb/Pr or IVX.
NOTE: The Color Matrix feature is available for component video
signal only.
Y/C Delay: Adjusts Y/C delay level.
Motion Select: Sets the interpolation method. Selects Still or
Adaptive. Still is used for non moving images such
as a document camera. Select Adapter for all mo-
tion video.
Motion Level: Adjusts level of motion detection when Adaptive
is selected.
YTR Adjustmen (Expert mode only):
Adjusts Luminance Transient Time.
CTR Adjustment (Expert mode only):
Adjusts Chroma Transient Time.
Telecine(Expert mode only)
Use 3:2 pull down correction to eliminate jitter and artifacts in video.
Auto: For film source such as a DVD player
Off: For signals other than film sources
Signal Level
This function is only active when multiple projectors are in use.
Auto Control: Select OK to execute Auto Control.
White:
Adjust saturation at the white peak.
R/G/B, Y/Cb/Cr or Y/Pb/Pr Gain (for Expert mode only):
Adjust RGB, Component or HDTV Gain to match
multiple projector color uniformity.
Projector Options
Enables you to set preferences and other operating options.
Timer
Enables you to turn on or off your projector automatically at a
specified time. Two timer functions are available: On/Off Timer
and Sleep Timer.