NEC XT5000 - Manual (Page 43)

E – 43
Acceptable Sync Sys Separate Sync/Composite Sync/ Sync on Green
Memory 100 individual memory locations
Menu System Pull down multilingual on-screen display
English/German/French/Italian/Spanish/
Swedish/Japanese
Keystone Correction Digital through Advanced AccuBlend Technology
Range 0 -
±
30˚
External Control RS232C (1) D-sub 9 pin
Contact Closure
Switcher
(2) D-sub 15 pin In/Out
Addressable Remote Control (wired / wireless)
Power Requirement 100-120 / 200-240 VAC, 50/60Hz
Input Current 11 / 7.3 A
Power Consumption 1.0 / 1.5 kW
Mechanical
Installation Orientation: Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear
Stacking: Up to 3 projectors can be gravity stacked
Dimensions 22.0" (W) x 26.9" (D) x 12.2" (H) with foot (not including lens)
560 mm (W) x 682 mm (D) x 308 mm (H) with foot (not including lens)
Net Weight 94.8 lbs (43Kg)
Environment Operational Temperature 40˚ to 95˚F / 5˚ to 35˚C,
Humidity: 20-80% non-condensing
Storage: 14˚ to 122˚F / -10˚ to 50˚C
Regulations USA UL 1950 FCC Class A
Canada CSA950 ( C-UL )
Europe EN60950 EN55022 Class A EN55024 EN61000-3-2 EN61000-3-3
Japan MITI VCCI I
EN60950 2 nd edition
Oceania EN60950 AS/NZS3548 Class A
Asia EN60850 CISPR22
*1: Permissible deviation for RGB convergence (Pixel deviation) is 1/2 pixel or less at center; 1 pixel or less
around the perimeter (when projection upward angle is 0˚).
*2: When using the zoom lens, it is recommended that the projector is positioned at an angle of from -15 to +15
degrees from the horizontal.
Specifications are subject to change without notice.