NEC XT5000 User Manual
Page 26
E – 26
REMOTE 1 Connector
This connector is used for either connecting the ISS-6020/ISS-6020G Switcher or a third party external control device. When
the Switcher is used, connect it with the optional control cable (15-15 pin; 50 ft./16m; CTL-6010) to this connector.
When used with the Switcher.
Pin No.
FUNCTION
1, 2, 6 and 7
Sending and receiving data when the Switcher is used.
9
Identifying the Projector
15
Ground
Others
Used inside the Projector. Normally set to OPEN.
When using with the Switcher ISS-6020/ISS-6020G, connect no. 1,2,6,7,9 and15 pins of the projector to the same no. pins of
the switcher as shown below.
5
4
3
2
1
10
9
8
7
6
15
14
13
12
11
Pin Configuration of Optional CTL-6010 Cable
REMOTE 1 connector of the Switcher
mini D-sub 15 pin (female)
REMOTE 1 connector of the Projector
mini D-sub 15 pin (female)
Shield (frame ground)
Pins without a number are open.
1
6
7
2
9
15
6
7
9
1
2
15