NEC XT5000 - Manual (Page 38)

E – 38
Allows you to set preferences for the on-screen menu.
Language:
You can choose one of seven languages for on-screen instructions.
The options are: English, German, French, Italian, Spanish, Swed-
ish and Japanese.
Menu Display Time:
Auto: The on-screen menu display appears when the buttons
on the remote control, or the controls on the rear panel
are pressed. The on-screen display will turn off at a
preselected time. The turn-off time is specified in sec-
onds up to a maximum of 30 seconds. Select your de-
sired time (3-30 seconds) from the menu.
Manual: The on-screen menu display appears when the buttons
on the remote control, or the controls on the rear panel
are pressed. The display will be turned on and off when-
ever the MUTE OSD button is pressed. If no button op-
eration is made for 20 minutes or more, the on-screen
message will automatically turn off.
Date Format:
Eight display formats can be selected. This date format sets the
current date that appears on the upper left corner of the screen.
Sleep Timer
On/Off Timer
Up to eight settings can be programmed.
•
Before setting On/Off Timer, make sure that Date, Time Pre-
set feature is set.
• Even after setting On/Off Timer, turning the projector on or
off with the remote control is possible.
• There are two time display formats: 24-hour or AM/PM for-
mat.
1. Open the On/OFF Timer window.
2. Select EDIT and press ENTER on the remote control to open the
EDIT window.
3. Set the Week, Day, On-Time and Off-Time using the CURSOR
buttons and INPUT buttons (1 thru 10). To cancel the on-time or
off time, use Delete.
4. Select Set and press the ENTER button on the remote control to
complete the setting. To close, select Close.
5. To enable your setting, select Active on the Execute Switch.
6. Select OK and press the ENTER button on the remote control to
complete the setting.
NOTE: When On Timer is set and the projector is in the standby
mode, the "00" display on the INDICATOR flashes to show that
On Timer program is active.
The projector must be in stand-by mode at the time of turning on.
The preset power-on time will be void if the cooling fan is working or
an error occurs.
1. Select your desired time between 30 minutes and 2 hours in 30
minutes.
2. Select Set and press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
Menu
Date, Time Preset:
Setting the Current Date and Time
You can set the current time, month, date, and year.