NEC XT5000 - Manual (Page 33)

E – 33
Menu Descriptions & Functions
Source Select
Enables you to select a video source such as a VCR, DVD player,
laser disc player, computer or document camera depending on what is
connected to your inputs.
Press the up/down buttons on your remote control or the projector
cabinet to highlight the menu for the item you want to adjust.
* RGB1,2,3
* Component (YCbCr)
* Video 1, 2
* S-Video 1, 2
* RGB Digital
* SDI
* Entry List—Displays the list of the entry signals. Use the ▲/▼ but-
tons on your remote control or the projector cabinet to select the
signal and press the ENTER button on the remote control or the
projector cabinet to project the image of the selected source.
Entry Edit Command (Expert mode only)
You can edit the signal on the entry list.
To do so:
1) While pressing and holding CTL, press ENTER on the remote con-
trol to display the Entry Edit Command window.
* Cut Enables you to remove a selected signal from the list and place
it on the “clipboard” in the projector.
* Copy Enables you to copy a selected signal from the list and place
it on the “clipboard” in the projector.
* Paste Enables you to paste the signal placed on the “clip-board”
to any other line of the list. To do this, select “Paste” and then select
the line number you want to paste to. Last press ENTER.
When complete, select OK and press ENTER. To exit without storing
setting, select Cancel.
Select “Source Name” and press ENTER to display the Source Name
Edit window. You can change source name on this window.
Select "Input Terminal" and press ENTER to display the Input Termi-
nal window. You can change input terminal on this window.
Select “Direct Key” and press ENTER to display the Direct Key win-
dow. You can assign specific remote keys for direct signal input selec-
tion.
NOTE: Existing direct key settings are overwritten with new set-
tings.
Select “List” and press ENTER to display the direct Key assignment
list.
Select “OK” and press ENTER to close the window.
To close the List window, press CANCEL on the remote.
* Edit Enables you to change source name or assign the direct key.
* The following buttons are not available for the currently projecting
signals:
1) The Cut and Paste buttons on the Entry Edit Command screen
2) The Input Terminal button on the Entry Edit screen