NEC XT5000 User Manual
Page 30
E – 30
A List of Direct Key Combinations
CTL+ INPUT (1-10)
Switches to any selected signal found in the Entry List.
To enable this combination, you must first assign specific remote keys for direct input
selection in the Entry Edit window.
CTL+ ENTER (While displaying Entry list)
Displays the Entry Edit Command window.
CTL+ MUTE PICTURE(SHUTTER)
Blocks all Projector Light Output.
CTL+CANCEL
Returns to the previous menu without closing the slidebar or dialog.
CTL+ UNDO
Clears all menus or adjustment/setting screens. All adjustments are saved automati-
cally.
CTL+
ᮤ
/
ᮣ
/ ▲ / ▼
Moves the slidebar or dialog box horizontally or vertically.
While using zoom on remote control:
Displays the magnifying glass icon.
CTL+
ᮤ
(BS)
Deletes one letter or numeral in the entry screen.
CTL+TEST
Displays the Passcode Entry window.
INPUT(1-10) in SW Level mode
Displays the Select switcher Input Slot window.
NOTE: This feature is available for SW 2 Level mode only.
When the SW 1 Level mode is selected, pressing INPUT key switches to the
corresponding slot without displaying the Select Slot window.
CTL+ MENU (ADDRESS)
Displays the remote ID entry window.
CTL+ ADJUST IMAGE (PROJECTOR)
Sequentially selects the Projector Options sub menu.
CTL+ POSITION (LENS)
Displays the Lens Shift control window.
CTL+ KEYSTONE (R)
Turns on red. Available only when the projector is in the test pattern mode.
CTL+ AMPLITUDE (G)
Turns on green. Available only when the projector is in the test pattern mode.
CTL+ ENTRY LIST (B)
Turns on blue. Available only when the projector is in the test pattern mode.
CTL+ MAGNIFY (ZOOM)
Zooms the lens in and out
CTL+ (FOCUS)
Adjusts the lens focus.