NEC MultiSync MT600 - Manual (Page 10)

54 SPECIFICATIONS
Electrical
Inputs Video (NTSC/PAL/SECAM/M-
NTSC)RGB (H:15-39 kHz)
Video Bandwidth 32 MHz
Color Reproduction Full color, 16.7 million colors simultaneously.
Horizontal Resolution NTSC 550, PAL 350, SECAM 350, M-NTSC 350
TV linesRGB 640 dots horizontal, 480 dots vertical
Power Requirement 110-120/220-240 VAC, 50/60 Hz
Input Current 4.6 A
Dimensions 12.7" (W) x 5.9" (H) x 16.0"(D)
32.2cm (W) x 15.0cm (H) x 40.73cm (D)
(not including lens cap and feet)
Net Weight 15.87 lbs (7.2 kg)
Operational Temperatures LCD projector: 32
°
-104
°
F(0
°
to 40
°
C), 20-80% humidity
Remote control: 32
°
-140
°
F (0
°
to 60
°
C)
IR receiver: 32
°
-140
°
F (0
°
to 60
°
C)
Regulations UL Approved (UL 1950, CSA 950)
Meets DOC Canada requirements
FCC Class A
NEC MultiSync ® LCD Projector Products
NEC Technologies, Inc. (hereafter NECTECH) warrants this product to be
free from defects in material and workmanship under the following terms.
HOW LONG IS THE WARRANTY?
Parts and labor are warranted for (1) one year from the date of the first
customer purchase. The lamp is warranted for 2000 hours of operating time
or six months, whichever comes first.
WHO IS PROTECTED?
This warranty may be enforced only by the first purchaser.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as specified below, this warranty covers all defects in material or
workmanship in this product. The following are not covered by the war-
ranty:
1. Any product which is not distributed in the U.S.A., Canada and Mexico
by NECTECH or which is not purchased in the U.S.A., Canada and
Mexico from an authorized NECTECH dealer. If you are uncertain as to
whether a dealer is authorized, please contact NECTECH at 800-836-
0655.
9
LIMED
2. Any product on which the serial number has been defaced, modified or
removed.
3. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, abuse, neglect, fire, water, lightning or other acts
of nature, unauthorized product modification, or failure to follow
instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by NECTECH.
c. Any shipment of the product (claims must be presented to the
carrier).
d. Removal or installation of the product.
e. Any other cause which does not relate to a product defect.
4. Cartons, carrying cases, batteries, external cabinets, magnetic tapes, or
any accessories used in connection with the product.
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. But we will not
pay for the following:
1. Removal or installation charges.
L I M I T E D W A R R A N T Y