NEC MultiSync MT600 User Manual

Page 14

Advertising
background image

Condition

Status

Blinking Rapidly

The projector is overheated. The lamp turns

(4 times a second)

off automatically. Allow the fan to run at least
two minutes before unplugging the projector.
Then check the filter and clean it if necessary.
If there is insufficient ventilation around the
projector or if the room where you’re presenting
is particularly warm, move the projector to
a cooler location. In either case, allow at least
five minutes before turning the projector back
on. If the problem persists, contact your NEC
dealer for service.

50

TROUBLESHOOTING

This section introduces you to your new MultiSync MT600 LCD
Projector, provides a list of materials that comes with your projec-
tor and describes the features and controls.

Congratulations On Your Purchase Of TheMultiSync
MT600 LCD Projector

The MultiSync MT600 is one of the very best LCD projectors
available today. The multiple LCD panels enable you to project
precise images up to 300 inches across (measured diagonally)
from your PC or Macintosh computer (desktop or notebook),
VCR, document camera, or even a laser disc player.

You can use the projector on a tabletop or cart, you can perma-
nently mount it on a ceiling*, or you can use MultiSync MT600
LCD Projector to project images from behind the screen. The
remote control can be used wirelessly or with a cable, and you can
even use the remote control with the IR receiver to operate the

I N T R O D U C T I O N

13

1

mouse on your PC or Mac. But best of all, the MultiSync MT600
is an NEC LCD projector. That means you can depend on years of
reliable performance and crystal-clear presentations!

The features you’ll enjoy include:

Simple set up and operation.

A high-performance 250 watt metal halide lamp that delivers

400 lumens (ANSI) and is guaranteed for 2000 hours of ser-
vice or six months, whichever comes first.

The “High Contrast” mode creates a clear image from a docu-

ment camera.

The power zoom control enables you to adjust the image to be

between 20 and 300 inches (measured diagonally).

The “2X-4X” button allows you to double and quadruple the

size of the image with a single click of the remote.

An image can be projected from in front or behind a screen,

and the projector can even be installed on the ceiling.

Advertising