NEC MultiSync MT600 - Manual (Page 11)

10
2. Costs of initial technical adjustments (set-up), including adjustment of
user controls. These costs are the responsibility of the NECTECH dealer
from whom the product was purchased.
3. Payment of shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on your product, consult the dealer from whom you
purchased the product.
2. Whenever warranty service is required, the original dated invoice (or a
copy) must be presented as proof of warranty coverage. Please be
prepared to describe or demonstrate the problem to your dealer.
3. For the name of the nearest NECTECH authorized service center, call
NECTECH at 800-836-0655.
LIMITATION OF IMPLIED WARRANTIES
ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE LENGTH OF THIS WAR-
RANTY.
EXCLUSION OF DAMAGES
NECTECH’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIM-
ITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT AT
OUR OPTION. NECTECH SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN
THIS PRODUCT, DAMAGES BASED UPON INCONVENIENCE,
LOSS OF USE OF THE PRODUCT, LOSS OF TIME, COMMERCIAL
LOSS; OR
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSE-
QUENTIAL OR OTHERWISE. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS
AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.
HOW STATE LAW RELATES TO THE WARRANTY
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
FOR MORE INFORMATION, TELEPHONE 800-366-5213
NEC TECHNOLOGIES, INC.
1250 N. Arlington Heights Road,Suite 500
Itasca, Illinois 60143-1248
NOTE: All products returned to NECTECH for service MUST have
prior approval. To get approval, call NEC Technologies at
800-836-0655.
53
This section provides technical information about the MultiSync MT600 LCD
Projector’s performance.
Optical
LCD Panel 1.3" p-Si with 640 x 480 dots
Lens Power zoom, power focus
F 3.5 f =52-73 mm
Lamp Metal halide lamp 250 W
(Guaranteed life span: 2,000 hours or
6 months from date of purchase,
whichever comes first.)
Image Size 20-300 inches diagonal
Projection Distance 3.28-39.37 ft (1.0-12 m)
Image Brightness Light output: 400 ANSI lumens
Contrast Ratio 200 : 1
Color Temperature 7,500 Kelvin
S P E C I F I C A T I O N S 6