NEC MultiSync MT600 - Manual (Page 4)

14 D Down 85H No Same as remote
15 D Right 5EH No Same as remote
16 D Left 5FH No Same as remote
17 X2/X4 87H No Same as remote
18 Freeze 91H No Same as remote
19 Front Floor 15H No
20 Front Ceiling 16H No
21 Rear Floor 17H No
22 Rear Ceiling 18H No
23 Auto Start On 19H No
24 Auto Start Off 1AH No
25 Auto Picture On 1BH No
26 Auto Picture Off 1CH No
27 Highcontrast On 1DH No
28 Highcontrast Off 1EH No
29 Power MGT On 23H No
30 Power MGT Off 24H No
31 800x600 Mode 25H No
32 640x480 Mode 26H No
60 SPECIFICATIONS
3
Operation of this equpment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfer-
ence at thier own expense.
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.
Important Safeguards
These safety instructions are to ensure the long life of your LCD projector
and to prevent fire and shock. Please read them carefully and heed all
warnings.
Installation
1. For the best results, use the LCD projector in a darkened room.
2. Place the LCD projector on a flat, level surface and in a dry area free from
dust and moisture.
3. Do not place the LCD projector in direct sunlight, near heaters or heat
radiating appliances.
4. Exposure to direct sunlight, smoke or steam could harm internal compo-
nents.
5. Handle your LCD projector carefully. Dropping or jarring your projector
could damage internal components.
6. Do not place heavy objects on top of the LCD projector.
7. If installing the LCD projector on the ceiling:
a. The ceiling must be strong enough to support the LCD and the
installation must in accordance with any local building codes.
b. The LCD projector must be installed by qualified NEC service
personnel.