NEC MultiSync MT600 - Manual (Page 29)

PC
CONTROL S-VIDEO
INPUT L / MONO R
AUDIO INPUT
VIDEO
INPUT DC12V/400mA
OUTPUT
RGB
REMOTE
CONTROL AUDIO
INPUT AUDIO
OUTPUT
28 INSTALLATION
Remote control in
wired operation.
Macintosh or Compatibles
IR Receiver
MAC mouse adapter (supplied)
IBM/MAC MultiCable
35
CAUTION
Do not unplug the projector while the cooling fan is on. The fan will remain on
as long as there is heat inside the LCD projector and the main power switch is
on.
Using The Icons
1. Press the “Menu” button on the remote control or projector cabinet to display the
icon bar.
2. Press the “Menu” button again to move to the next menu, or press the
“Select” button to highlight the menu icon for the item you want to adjust.
When an icon is highlighted, the name of the item appears on the right side of
the icon menu bar.
3. Adjust the level or turn the selected item on or off by using the (+) or (-) buttons
on the remote control or cabinet. The on-screen gauge will
show you the amount of increase or decrease. [The (+) button is “on”
and (-) is “off.]
4. The change is stored until you adjust it again.
5. Repeat steps 2-4 to adjust an additional item, or press “Menu” on your remote
control or cabinet to quit.
gauge