Connecting the supplied power cable, Installaton and connectons, Connectng the suppled power cable – NEC NP41 User Manual
Page 24: Caution, Lamp status power, On/stand by focus
. Installaton and Connectons
LAMP
STA
TUS
POWE
R
SOUR
CE
AUTO
ADJ.
SELE
CT
ON/S
TAN
D BY
FOC
US
VID
EO IN
COM
PUT
ER IN
PC C
ONT
ROL
AUD
IO IN
S-V
IDEO
IN
ON/STAND BY
FOCUS
LAMP
STATUS
POWER
Connectng the Suppled Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cable in the wall outlet.
To wall outlet
The projector will go into its stand-
by mode and the POWER indica-
tor will glow orange.
CAUTION:
Do not try to touch the ventilation outlet on the right front (when seen from the front) as it can become heated
while the projector is turned on and immediately after the projector is turned off.
Make sure that the prongs are fully inserted into both
the power plug and the wall outlet.