NEC NP41 - Manual (Page 88)

79
8. Appendx
➋ Specifications
This section provides technical information about the NP62/NP61/NP52/NP41 projector's performance.
Model Number NP/NP/NP/NP
Optcal
Projection System Single DLP™ chip (0.55", aspect 4:3)
Resolution 1024 x 768 pixels* 1
Lens
Manual zoom and auto focus/manual powered focus
(effective range: 57.1"/1.5 m - 216.5"/5.5 m) / manual focus
F2.2 - 2.34, f = 20.4 mm - 24.5 mm
Lamp
NP62/NP61: 220W AC (170W ECO mode)
NP52/NP41: 200W AC (170W ECO mode)
Light Output* 2 ,* 3
NP62/NP61: 3000 lumens (approx. 75% in ECO mode)
NP52: 2600 lumens (approx. 85% in ECO mode)
NP41: 2300 lumens (approx. 85% in ECO mode)
Contrast Ratio* 3
(full white: full black)
1600:1
Image Size (Diagonal)
33" - 300" diagonal (4:3)
(image sizes with less than 40" are available only in tele mode)
Projection Distance
57" - 439" (wide) / 57" - 530" (tele)
1.45 - 11.14 m (wide) / 1.44 - 13.45 m (tele)
Projection Angle 14.7° - 15.0° (wide) / 12.3° - 12.6° (tele)
* 1 Effective pixels are more than 99.99%.
* 2 This is the light output value (lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any other mode
is selected as the [PRESET] mode, the light output value may drop.
* 3 Compliance with ISO21118-2005
Electrcal
Inputs
1 Analog RGB shared with component video (Mini D-Sub 15 Pin), 1 S-Video (Mini DIN
4 Pin), 1 Video (RCA), 1 Stereo Mini Audio shared with analog RGB input
PC Control 1 PC Control (Mini DIN 8 Pin)
USB Port 1 A Type
External Control RS232, IR, USB (NP62/NP52)
Color Reproduction 16.7 million colors simultaneously, Full color
Compatible Signals* 4
VGA/SVGA/XGA/WXGA/WXGA+/SXGA/SXGA+/UXGA
480i/480p/576i/576p/720p/1080i
Video Bandwidth RGB: 100MHz (max.)
Scan Rate
Horizontal: 15 kHz to 100 kHz(RGB: 24 kHz or over)
Vertical: 50 kHz to 120 Hz (Signals with higher than refresh rate 85 Hz support resolu-
tions of 1024 x 768 or lower.)
Sync Compatibility Separate Sync/Composite Sync/Sync on G/ Sync on Video
Horizontal Resolution
540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Power Requirement/Input Current
NP62/NP61: 100-240V AC, 50/60 Hz, 3.5 - 1.4 A
NP41: 100-240V AC, 50/60 Hz, 3.1 - 1.2 A
NP62G/NP61G: 200-240V AC, 50/60 Hz, 1.6 A
NP52G/NP41G: 200-240V AC, 50/60 Hz, 1.5 A
Power Consumption
NP62/NP62G: 300W in Lamp NORMAL mode, 235W in Lamp ECO mode, 5W in
STANDBY MODE (POWER-SAVING)
NP61/NP61G: 285W in Lamp NORMAL mode, 225W in Lamp ECO mode, 5W in
STANDBY MODE (POWER-SAVING)
NP52G: 275W in Lamp NORMAL mode, 235W in Lamp ECO mode, 5W in STANDBY
MODE (POWER-SAVING)
NP41/NP41G: 265W in Lamp NORMAL mode, 225W in Lamp ECO mode, 5W in
STANDBY MODE (POWER-SAVING)
* 4 An image with higher or lower resolution than the projector’s native resolution (1024 x 768) will be displayed
with scaling technology.