NEC NP41 - Manual (Page 33)


3. Projectng an Image (Basc Operaton)
SELECT SOURCE AUTO
ADJ.
ON/STAND BY
FOCUS
LAMP
STATUS
POWER
SOURCE AUTO
ADJ.
ON/STAND BY
FOCUS
LAMP
STATUS
POWER
SELECT
➍ Adjusting Focus Manually
Adjust the focus manually in the following cases:
• When adjusting the focus out of the effective range of the auto-
matic focus
• When finely adjusting the focus
• When the menu setting for [AUTO FOCUS] is turned off
Adjustng wth buttons on the cabnet or the remote control
1. Press the fOCUs button quickly.
The focus adjustment screen will be displayed.
The focus adjustment screen will be closed if no button operation is
made for 5 seconds.
TIP: If the projector is placed within the effective focus range, pressing and
holding the FOCUS for a minimum of 2 seconds starts the AUTO FOCUS func-
tion.
2. Press the seleCt
◀ or ▶ button to adjust the focus.
3. Press the eXit button.
The focus adjustment screen will be closed.
VOLUME ASPECT HELP
FOCUS L-MOUSE-R
FREEZE PICTURE
LAMP MODE
VIDEO AUTO ADJ. COMPUTER
S-VIDEO VIEWER
ENTER EXIT
MENU
UP
PAGE
OFF
POWER
ON
DOWN
MAGNIFY AV-MUTE