NEC NP41 - Manual (Page 29)

0
3. Projectng an Image (Basc Operaton)
Manual Operaton
Place your projector on a flat level surface and ensure that the
projector is square to the screen.
[Adjust the Tilt Foot]
Lift the front edge of the projector to center the image verti-
cally. (
→ page 21 )
[Zoom]
Use the ZOOM lever to adjust the image size on the screen.
➌ Adjusting the Picture Size and Position
Automatc Operaton
[AUTO FOCUS]
Just placing the projector on a flat level surface makes a fo-
cused image. (
→ page 22 )
TIP: If the projected image is distorted horizontally, move the projec-
tor left or right to center the image horizontally on the screen.
[AUTO KEYSTONE Correcton]
Adjusting the height of a projected image or changing the
projection angle will result in the AUTO KEYSTONE function
quickly correcting the vertical distortion. (
→ page 23 )