NEC NP41 - Manual (Page 67)

8
. Usng On-Screen Menu
Selectng Aspect Rato [ASPECT RATIO]
Aspect Ratio allows you to select the best Aspect mode to display your source image.
You can also display the Aspect Ratio window by pressing the ASPECT button on the remote control. (
→ page 7 )
NORMAL Standard 4:3 aspect
WIDE ZOOM
The 16:9 image is stretched left and right to fit 4:3 screen. Some left and right edges of
the image are cut out.
16:9 signal
CINEMA
The 16:9 image is compressed top and bottom of the image to fit 16:9 screen. You can
adjust the image position for [CINEMA] aspect. See [CINEAMA POSITION] for setting
the image position. (
→ page 59 )
16:9 signal
NATIVE
(RGB only)
The projector displays the current image in its true resolution. Selecting other options
than [NATIVE] will expand or reduce the image to fit the projector’s native resolution (1024
x 768 pixels).
Example: When a source with 800 x 600 pixels is selected:
1024
768
800
600 768
1024
NOTE: When a non- RGB is selected, you cannot select [NATIVE].
NOTE: When you are displaying an RGB image with a higher resolution than the projector's native resolution such as SXGA, the
image will be displayed in the projector’s native resolution (XGA) even if [NATIVE] is selected.
[NATIVE]
Opton other than
[NATIVE]