Renesas M3062PT-EPB - Manual (Page 23)

( 21 / 80 )
2.3 Name of Each Part
2.3.1 System Configuration
Figure 2.1 shows a configuration of the PC7501 system.
Figure 2.1 System configuration
(1) Emulation probe M3062PT-EPB
This emulation probe consists of the interface board PCA7501EPBA for the M16C Series and
MCU board M3062PT-EPBM for the M16C/62P. The M3062PT-EPBM with an evaluation
MCU is separately available for replacement.
(2) Converter board M30800T-PTC
This is a converter board for connecting to 100-pin 0.65-mm-pitch LCC socket IC61-1004-051
on the target system. For details, refer to "3.6 Connecting the Target System" (page 34).
LPT parallel, USB or LAN interface
(2) Converter board
M30800T-PTC
(1) Emulation probe
M3062PT-EPB
Target system
Emulator PC7501
Emulator debugger
M3T-PD30F
Host machine
2.3.2 Names and Functions of the PC7501 Upper Panel LEDs
Figure 2.2 shows the names of the LEDs on the upper panel of the PC7501.
System status LEDs Target status LEDs
Figure 2.2 Names of the LEDs on the upper panel of the PC7501