Renesas M3062PT-EPB - Manual (Page 8)

( 6 / 80 )
Terminology
Some specific words used in this user's manual are defined as follows:
PC7501 system
This means an emulator system built around the PC7501 emulator. The PC7501 emulator system is
configured with an emulator main unit PC7501, emulation probe M3062PT-EPB, emulator debugger
M3T-PD30F and host machine.
Emulator main unit PC7501
This means an emulator for the M16C Family MCUs. You can configure your emulator system by
changing emulation probes according to your target MCU.
Emulation probe M3062PT-EPB
This means the emulation probe (this product) for the M16C/62 Group M16C/62P. It is used with the
emulator main unit PC7501.
Emulator debugger M3T-PD30F
This means a software tool for the M16C Series. You can control the emulator from a host machine
through various interfaces.
Firmware
This means a program stored in the flash ROM of the emulator main unit PC7501. It analyzes contents
of communication with the emulator debugger and controls the emulator PC7501. This program is
downloadable from the emulator debugger to upgrade firmware or to support other MCUs.
Host machine
This means a personal computer used to control the PC7501 emulator system.
Target MCU
This means the microcomputer you are going to debug.
Target system
This means a user's application system using the microcomputer to be debugged.
User program
This means a user's application program to be debugged.
Evaluation MCU
This means a microcomputer mounted on the emulation probe which is operated in the special mode
for the emulator.
*
In this user's manual, this symbol is used to show active LOW. (e.g. RESET*)