Renesas M3062PT-EPB - Manual (Page 64)

( 62 / 80 )
Vcc1 = Vcc2 = 3 V
(3) Timing Requirements
Table 5.7 and Figures 5.6 show timing requirements in memory expansion mode and microprocessor
mode.
Table 5.7 Timing requirements
Figure 5.6 Timing requirements
* Compared with an actual MCU, this product enters high-impedance state after a 0.5 cycle delay.
Symbol Item
Actual MCU
[ns]
This product
[ns]
Min. Max. Min. Max.
tsu(DB-RD)
tsu(RDY-BCLK)
tsu(HOLD-BCLK)
th(RD-DB)
th(BCLK-RDY)
th(BCLK-HOLD)
td(BCLK-HLDA)
Data input setup time
RDY* input setup time
HOLD* input setup time
Data input hold time
RDY* input hold time
HOLD* input hold time
HLDA* output delay time
65
55
65
See left
See left
See left
50
40
50
0
0
0
Common to "with wait" and "no-wait" (this product)
Common to "with wait" and "no-wait" (actual MCU)
40 See left