Radio Shack PRO-96 - Manual (Page 109)

109
System Tests
Select Test
Exits if no
Key Press
3. Press 1 . The scanner
displays:
Factory Init
Erase Memory
ENTER if Yes
CL to Exit
4. Press ENTER . The scanner
displays:
Initializing
Clr Main Mem
V-Scan is OK
Please Wait
CARE
Keep the scanner dry; if it gets
wet, wipe it dry immediately. Use
and store the scanner only in
normal temperature environments.
Handle the scanner carefully; do
not drop it. Keep the scanner away
from dust and dirt, and wipe it with
a damp cloth occasionally to keep
it looking new.
SERVICE AND
REPAIR
If your scanner is not performing
as it should, take it to your local
RadioShack store for assistance.
To locate your nearest
RadioShack, use the store locator
feature on RadioShack's website
(www.radioshack.com), or call
1-800-The Shack (843-7422) and
follow the menu options. Modifying
Ô
NOTE
Ô
Resetting the
Scanner
Pressing the reset button
does not clear the
scanner’s working
memory or the
V-Scanner folders.
Initializing the
Scanner
• Do not turn off the
scanner until the
initialization is
complete. When the
initialization is
complete,
M000
appears on the top
line of the display.
Bank 0 Ch 00 appears
on the bottom line.
• It may be possible to
save your working
memory to a V-
Scanner folder prior
to performing
initialization. See
“Working with V-
Scanners” on
Page 75.