Radio Shack PRO-96 - Manual (Page 73)

73
perform an operation using the
keypad.
In Ignore mode, the backlight
functions as described in
Keypress mode, except that the
scanner ignores the first keypress.
This mode is useful when you wish
to quickly illuminate the display
and keypad without having to
search for the
7 key. The first
keypress is ignored, and the
scanner sounds the low pitched
error beep to remind you that the
first key pressed to activate the
backlight is ignored by the
scanner.
In any backlight mode, you can
press and hold
7 for about 1
second to force the backlight on
full time. Press
7 while the
backlight is on to turn it off.
You can also change the backlight
mode and duration.
1. If the scanner is on, turn it off
and back on again. Welcome
To Digital Trunking appears in
the scanner’s display.
2. While Welcome To Digital
Trunking appears, press
LIGHT .
3. Press S or T to select the
desired backlight mode and
duration. Selecting 3, 5, 10 or
20 sets the backlight mode for
normal operation for the
selected duration. Selecting
K3, K5, K10 or K20 sets the
backlight mode for Keypress
operation for the selected
duration. Selecting I3, I5, I10
or I20 sets the backlight mode