Radio Shack PRO-96 User Manual
Page 53
53
SR6________Limit search (User
configurable)
Follow these steps to select
preprogrammed search bands and
search them for active
frequencies:
1. Repeatedly press
SRCH
to
select your desired search
bank (SR0, SR1, SR2, SR3,
SR4, SR5, or SR6).
2. In the marine and CB bands,
you can directly select a
channel or search through the
band. When
M
appears at the
left most position of the
second line, you can directly
select a channel (refer to
“Search Band Charts” on
Page 54). Use the numeric
keypad to select a specific
two digit channel number (for
example, press
1 6
to select Channel 16, or
0 5
to select channel 5). You
can also change the channels
by pressing
S
or
T
.
There are several group
banks in SR2 Police/Fire and
SR4 ham bands. You can turn
on the groups by pressing the
group numbers. For example,
to turn off group 0, press
0
.
3. Press
FUNC
, and then
SRCH
while
M
is displayed.
M
changes to
S
and now you
can search through the band.
Press
FUNC
, and then
SRCH
again to return to the previous
mode.
4. Rotate
SQUELCH
clockwise
and leave it set to a point just