Radio Shack PRO-96 - Manual (Page 60)

60
U
SING
S
EEK
S
EARCH
While the scanner is searching,
you can activate seek search by
pressing
FUNC then 7 . Seek ON
appears on the bottom line. The
scanner stops on each active
frequency for five seconds and
resumes searching automatically.
Seek functions only in search
banks 1, 2, 3, 4, 5, and 6.
• You can copy and save a
frequency into a specified
bank, channel, or priority
channel when the scanner
finds an active frequency. See
“Using Frequency Copy” on
Page 61 to save the
frequency. The frequency
copy works only in search
banks 1, 2, 3, 4, 5, and 6.
• There are several group
banks in SR2 Police/Fire and
SR4 ham bands. You can turn
off or on the groups by
pressing the group numbers.
For example, to toggle group
bank 0, press
0 .
• In the Air and Limit search
bands, press FUNC then press
S to start searching up from
the lowest frequency or press
T
to start searching down
from the highest frequency.
• You can press
S
or
T
at any
time to change the search
direction, or force a search
resume while stopped on an
active frequency.
• Use
S
or
T
while paused to
increment the frequency one
step at a time.