Radio Shack PRO-96 - Manual (Page 47)

47
5. Press ENTER to store the text
with the channel.
Assigning a Text Tag to a
Group ID
1. Press PGM .
2. Press TRUNK .
3. Press FUNC then
S
or
T
to
select the desired bank.
4. Press TRUNK to select the
desired sub-bank.
5. Press or hold down
S
or
T
to
select the desired group ID.
6. Press TEXT then enter the
text using the numeral keys
(see “Text Input Chart” on
Page 48). Use
S , T , or CLR
to edit your entry, or press
and hold
CLR to abort the text
entry.
7. Press ENTER to store the text
with the ID.
Assigning a Text Tag to a
Channel Storage Bank
Select a channel within the
desired channel storage bank by
pressing
MAN and entering the
channel storage bank number
(000 for bank 0 or 200 for bank 2,
for example). Press
MAN again.
1. Press PGM .
2. Press FUNC , and then 7 . The
cursor appears at the third
line of the display. Enter the
text using the keypad. (See
“Text Input Chart”). Use
S
,
T , or CLR to edit your entry,