Radio Shack PRO-96 - Manual (Page 115)

115
Program Mode
ENTER
When monitoring a conventional channel
that is programmed for CT or DC Search
Mode, stores a detected CT or DC code
with the channel memory.
S or T
S steps to the next channel, T steps to the
previous channel. Hold down to scroll.
FUNC + MAN Toggles digital AGC.
FUNC + TRUNK Enters trunked ID list for current bank.
FUNC + PRI
Stores the frequency of the selected
channel into the priority channel.
FUNC + TUNE
Stores the frequency of the selected
channel frequency into the tune memory.
FUNC + ATT Toggles attenuator mode, normal or global.
FUNC + 5
Toggles open or closed mode for current
bank.
FUNC + 9
Adjust display contrast, use
S
or
T
then
ENTER.
FUNC + L/OUT Jumps to the next locked out channel.
FUNC + S or T S jumps forward to the next bank, T jumps
to the previous bank. Hold down to scroll.
Keystrokes Function
SCAN Activates Scan Mode.
MAN Activates Manual Mode.
PGM Increments to the next channel memory.
WX Activates Weather Mode.
PRI Selects priority channel for programming.
TEXT Edits text tag for selected channel.
TRUNK Enters ID List Edit for the selected bank.
TUNE Enters Tune Mode.
ATT
Toggles attenuation for selected channel,
or, if global attenuation is set, toggles
global attenuation on or off.
L/OUT Toggles lockout on the selected channel.
MODE
Cycles through valid modes for the
selected channel, clears any stored CT or
DC settings.
Keystrokes Function