Roland HPD-15 - Manual (Page 12)

12
Attaching the HPD-15 to the Stand
1
Attach the stand holder (included with the optional PDS-15) to
the HPD-15.
Using the screws provided with the PDS-15, attach the holder so the unit is
oriented as shown in the diagram.
fig.0-03.e
2
Attach the HPD-15 to the pad stand (PDS-15).
For details on assembling the pad stand and attaching the HPD-15, refer to
the owner’s manual for the pad stand.
fig.0-04.e
Use the screws provided
with the PDS-15. Use of
other screws may result in
damage to the unit.
Wide
Narrow
for playing by fingers for using the heel of your hand
(like a conga player)
If you attach only the
screws to the HPD-15
without attaching the stand
holder and strike the pads
strongly when it is resting
on the floor or table, the
screw heads may contact
the floor or table and
scratch it.
Do not slope the stand
excessively. Be careful that
the stand does not lose its
balance.