Roland HPD-15 - Manual (Page 30)

30
Chapter 1 Quick Start
If the Sound or Operation Is not as You
Expect
If, as you modify the settings, the sound or operation is no longer as you
expect and you are unable to restore the correct settings, you can execute the
Factory Reset operation to reset all settings to their factory condition.
fig.1-29
1
Press [SYSTEM].
[SYSTEM] will light.
2
Hold down [PARAMETER ] to access the following screen.
fig.1-30
3
Turn [PATCH/VALUE] to select “ALL.”
fig.1-30a
4
Press [WRITE].
The following screen will appear.
fig.1-31
5
If you wish to execute factory reset, press [WRITE].
After the data has been initialized, the following screen will appear.
fig.1-09
* If you decide not to execute, press [EXIT].
3 1 2 4, 5
When you execute factory
reset, the edited contents
will be lost.
You can make your
selection rapidly by using
the Skip function (p. 32).
FACTORY RESET
SYSTEM [WRITE]
It is also possible to
initialize specific data, such
as only the patches or only
the system settings. For
details, refer to “Restoring
the Factory Settings” (p.
85).
FACTORY RESET
ALL [WRITE]
Are You Sure?
[WRITE/EXIT]
P01 LATIN
01 Conga