Runco CW-50MC - Manual (Page 10)

9
7 DIGITAL RGB (INPUT2) (DVI-D jack-non HDCP)
Use to connect a computer resolution only. (VESA standard)
8 AUDIO (INPUT2) (Stereo mini jack)
Used to obtain sound when INPUT1, INPUT2 is selected. Connect this jack to the audio output connector of the device
connected to the plasma display’s INPUT1 or INPUT2.
9 AUDIO (OUTPUT) (Stereo mini jack)
Used to output the audio of the selected source component connected to the plasma display to an AV amplifier or similar
component output can be set to variable or fixed.
10 MAIN POWER switch
Used to switch the main power or the main unit on and off.
11 AC IN
A power cable is furnished with the main unit. Connect one end of the power cable to this connector and the other
end to a standard AC power source.
12 SPEAKER (L) terminal
For connection of an external left speaker. Connect a speaker that has an impedance of 8 -16 Ω.
13 INPUT5 (DVI Jack-HDCP COMPLIANT)
The DVI input will process digital video 480p, 720p and 1080i signals (computer rates are not recommended).
14 AUDIO IN 3, 4 and 5
1/8” Mini stereo jack used for external audio input. Used for Audio Inputs when desired with a video source
connected to video input 3, 4 and 5.
15 INPUT4
Interlaced component (480i) input.
16 INPUT3 (S-Video / Composite Video Input)
Selectable with center push button.