Runco CW-50MC - Manual (Page 14)

MENUS for VIDEO NTSC, PAL or DIGITAL 480P and HDTV
INPUT 3 CINEMAWALL
SCREEN SET UP OPTION PICTURE
CONTRAST : 0
BRIGHTNESS : 0
COLOR : 0
TINT : 0
SHARPNESS : 0
FACTORY
INPUT3 CINEMAWALL
SCREEN SET UP OPTION PICTURE
POSITION : 0/ 0
DISPLAY RESET
INPUT 3 CINEMAWALL
SCREEN SET UP OPTION PICTURE
AUTO POWER OFF : DISABLE
COLOR TEMP. : MIDDLE
VIDEO NR : MIDDLE
MPEG FILTER : LOW
CHROMA EE : ON
CINEMA MODE : OFF
COLOR SPACE : RGB
CLAMP POSITION : AUTO
SIGNAL : 525p
OSD Menus for Video NTSC, PAL or Digital 480p & HDTV
13
1. PICTURE Tab
The PICTURE menu allows for adjustment of picture
that are unique per input and stored automatically.
• CONTRAST is used to set the white level.
• BRIGHTNESS. is used to set the black level.
• COLOR is used to set color saturation levels.
• TINT allows for balance between red and green levels.
• SHARPNESS is used to enhance high frequency
response in the video signal.
Highlight FACTORY and press SET button for factory
default settings. For current input only.
2. SCREEN Tab
The SCREEN menu offers adjustments to the position
of the plasma:
• POSITION is used to control movement of the
picture in the Horizontal direction (H), and the Vertical
direction (V).
• DISPLAY RESET causes all the mode settings to be
returned to the factory set default.
3. SET UP Tab
The SET UP menu has adjustment for the initial set up of the
plasma:
• AUTO POWER OFF allows for different light
outputs depending on the situation and environment.
Normally set to disable.
• COLOR TEMP. sets the preset white balance of the
picture.
• VIDEO NR eliminates the artificial noise in the video.
• MPEG FILTER is set for providing noise free video
images when watching a DTV channel or a DVD.
• CHROMA EE is usually set to OFF.
• CINEMA MODE detects film-based sources and
regenerates them for higher picture quality.
• COLOR SPACE is choosing the appropriate color signal.
• CLAMP POSITION detection of the sync signal, usually
set to AUTO.
• SIGNAL displays the frequency and rate of the source.
These menus will appear only when displayed for video.