Inputs and controls – Runco CW-50MC User Manual
Page 9
INPUTS AND CONTROLS
8
1 SPEAKER (R) terminal
For connection of an external right speaker. Connect a speaker whose impedance is 8 -16 Ω.
2 COMBINATION IN/OUT
Used when a number of sets are controlled collectively. Use a mini DIN 6 pin cable (straight, fully connected).
3 RS-232C
This is used for serial integration with automation systems.
4 ANALOG RGB IN (INPUT1) (mini D-sub 15 pin)
For connection of components that have RGB or component output jacks such as a personal computer,
DVD player, or external RGB decoder. (break out cable will be needed for BNC type connection)
5 ANALOG RGB OUT (INPUT1) (mini D-sub 15 pin)
Use the ANALOG RGB OUT (INPUT1) terminal to output the video signal to an external monitor or other
component.
NOTE: The video signal will not be output from the ANALOG RGB OUT (INPUT1) terminal when the main power
of this display is off or in standby mode.
6 AUDIO (INPUT1) (Stereo mini jack)
Use to obtain sound when INPUT1 is selected. Connect this jack to the audio output connector of the device connected
to the plasma display’s INPUT1.
�
�����
�������
��
������� �
��
�����������
��������������������
�������
�������������
�����
������
��������������
�����
������������
�����
�
�
�����
�����
�
�������
�
�
���
�
������� �
������
���
��������
�
����������
��
��
��
�����
��
��������������������
��������������������������������������������������������������������
����������
������
�����
��
���
���