Roland BR-864 - Manual (Page 103)

103
Creating original patterns
Section 3
Copying patterns
1. Press [ARRANGE/PATTERN/OFF] repeatedly until the
indicator is flashing.
2. Press [CURSOR] to move the cursor to “COPY,” and
press [ENTER].
The Pattern Copy screen appears.
fig.03-429d
3. Turn the TIME/VALUE dial to select the copy-
destination arrangement.
S001–S100: Song Pattern 1–100
4. Press [ENTER].
The screen for confirming the copy appears.
fig.03-430d
5. Press [ENTER] (YES) to copy.
To cancel, press [EXIT] (NO).
Once the arrangement has been copied, the screen for
selecting the copy destination returns to the display.
6. Press [EXIT] repeatedly to return to the Play screen.
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
Erasing patterns
1. Press [ARRANGE/PATTERN/OFF] repeatedly until the
indicator is flashing.
2. Press CURSOR [ ] repeatedly to move the cursor to
“ERASE,” and press [ENTER].
fig.03-432d
3. Turn the TIME/VALUE dial to select the pattern to be
deleted.
S001–S100: Song Pattern 1–100
4. If you want to delete the pattern, press [ENTER].
The screen for confirming the deletion appears.
fig.03-433d
5. Press [ENTER] (YES) to delete the pattern.
To cancel, press [EXIT] (NO).
Once the deletion is complete, the screen for selecting the
pattern to be deleted returns to the display.
6. Press [EXIT] repeatedly to return to the Play screen.
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.