Roland BR-864 - Manual (Page 108)

108
About the drum kits
Erasing drum sounds
1. Press [TONE LOAD].
2. Press CURSOR [ ] [ ] to move the cursor to
“ERASE,” and press [ENTER].
fig.03-523d
3. Turn the TIME/VALUE dial to specify the erase drum
kit, then press [ENTER].
S1–5: Song Drum Kit 1–5
fig.03-524d
4. Turn the TIME/VALUE dial to specify the erase drum
sound, then press [ENTER].
* Select “ALL” if you want to erase all of the drum sounds in
the kit.
fig.03-525d
“Are you sure?” appears.
5. Press [ENTER] (YES) to erase the drum sound.
To cancel, press [EXIT] (NO).
Once the erasing is complete, the beginning screen for
Tone Load is returned to the display.
6. Press [TONE LOAD] (or [EXIT]) to return to the Play
screen.
Changing the position (pan) of
the drum sounds
1. Press [TONE LOAD].
2. Press CURSOR [ ] to move the cursor to “PAN,” and
press [ENTER].
fig.03-526d
3. Turn the TIME/VALUE dial to specify the drum kit
whose panning you want to change, then press
[ENTER].
S1–5: Song Drum Kit 1–5
fig.03-527d
4. Use [CURSOR] and the TIME/VALUE dial to specify
the drum sound whose panning is being changed and
the pan setting.
fig.03-528d
* When you press [RHYTHM PAD], causing the indicator to
light/flash, you can then set the drum sounds by tapping REC
TRACK [1/5]–[4/8], [V-TRACK], and [TAP].
* Pressing [ENTER] sets this to “C00” (Center).
5. Press [TONE LOAD] (or press [EXIT] repeatedly) to
return to the Play screen.