Roland BR-864 - Manual (Page 162)

162
Saving BR-864 track data in WAV/AIFF format (WAV/AIFF Export)
fig.06-114d
When you have finished exporting the data, the Idling
screen returns to the display.
8. Quit the connection to the computer.
In My Computer, right-click on the “BOSS_BR-864”
icon (or “Removable Disk (*:)” icon) to “Eject” the disk.
* If this procedure fails to eject the disk, use the procedure below.
1) Click the icon in the task tray, then click the
“Stop USB Disk—drive (*:)” message displayed
there.
fig.06-105a
2) Click [OK] in the “Safe To Remove Hardware”
dialog box that appears.
9. Press the BR-864’s [EXIT].
The file format selection screen returns to the display.
The contents of the “USB” folder are automatically
deleted the instant the [EXIT] button is pressed.
* If you press [EXIT] without quitting the connection to the
computer, the following screens appear. In this case, pressing
[ENTER] returns the file format selection screen to the
display.
fig.06-106ad
At this point, you can safely disconnect the USB cable
from the BR-864 and the computer.
10. Repeat Steps 4–9 as needed.
11. When you have finished exporting the WAV or AIFF
file(s), press [EXIT] several times to return to the Play
screen.
With Macintosh
1. Connect your computer and the BR-864 with a USB
cable.
2. Confirm that the recorder is stopped, then press [USB].
The USB function select screen appears.
3. Select “EXPORT” with the TIME/VALUE dial, then
press [ENTER].
fig.06-115d
4. Press CURSOR [ ] [ ] to select the file format, then
press [ENTER].
WAV: This is an audio format used primarily with
Windows.
AIFF: This audio format is used primarily with
Macintosh.
5. Turn the TIME/VALUE dial to select the track to be
saved.
When saving in mono
fig.06-117d
When saving in stereo
* Select the track combination 1/2, 3/4, 5/6, or 7/8.
fig.06-116d
Task Tray Task Bar