Roland BR-864 - Manual (Page 130)

130
Mastering Tool Kit Parameter Functions
Mixer
Adjusts the volume of each frequency band.
Lo Level -80– +6 dB
Sets the volume level of the lower range after the signal passes
through the expander and compressor.
Mid Level -80– +6 dB
Sets the volume level of the midrange after the signal passes through
the expander and compressor.
Hi Level -80– +6 dB
Sets the volume level of the upper range after the signal passes
through the expander and compressor.
Limiter
This suppresses high-level signals to prevent distortion.
On/Off OFF, ON
Sets the limiter to ON or OFF.
Thres -24–0 dB
Adjust this as appropriate for the input signal from your bass.
Attack 0–100 ms
This sets the time it takes for the limiter to go into effect once the
input level exceeds the threshold level.
Release 50–5000 ms
Adjusts the time until when the limiter will turn off after the input
level falls below the threshold level.
Output
This makes settings that affect the overall output.
Level -80– +6 dB
Sets the volume level of the overall sound after the signal passes
through the limiter.
Soft Clip Off, On
This suppresses noticeable distortion occurring with heavy use of
the compressor/limiter effect.
Dither OFF, 24–8 BIT
This prevents the action of muting sounds from being too noticeable.