Roland BR-864 - Manual (Page 26)

26
Listening to the demo songs
Adjusting the Display Contrast
Depending on where the BR-864 is situated, the display
contents may be difficult to read. If this is the case, perform
the procedure given below to adjust the contrast (1 to 32).
fig.00-309
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “SYS,”
and press [ENTER].
fig.00-310d
3. Press CURSOR [ ] [ ] to select “LCD Contrast,” and
adjust the contrast with the TIME/VALUE dial.
fig.00-311d
4. After completing the adjustment, press [UTILITY] (or
press [EXIT] repeatedly) to return to the Play screen.
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
You can turn the TIME/VALUE dial while pressing
[UTILITY] to adjust the contrast. Use each procedure as
appropriate.
(3) Listening to a demo song
Selecting a song
Upon power-up, the song that was selected before the power
was turned off is selected, and the data of that song is loaded.
As soon as the data has been loaded, the Play screen appears
in the display.
To listen to a demo song, follow the procedure given below.
fig.00-312
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “SEL,”
and press [ENTER].
The Song Select screen appears.
fig.00-313d
1,4 4
2,3
2
3
1,4 4
2
2
3