Roland BR-864 - Manual (Page 133)

133
Section 4
Track EQ Parameter Functions
Setting Procedure
1. Press [EQ].
2. Use [CURSOR] and the TIME/VALUE dial to set the
EQ On/Off for each track.
* Pressing a REC TRACK button moves the cursor to the track
corresponding to the button pressed.
fig.04-401d
3. To change the EQ settings, press CURSOR [ ]
repeatedly to display the parameter screen, then turn
the TIME/VALUE dial to change the settings value.
fig.04–402d
4. After you have completed the setting, press [EQ] or
[EXIT] to return to the Play screen.
Parameter List
This is a Four-band equalizer that is independent for each track.
If you adjust the equalizer while listening to the sound, you may
notice a clicking noise. This is not a malfunction. If the noise is
objectionable, make adjustments while the sound is not playing.
On/Off OFF, ON
This parameter turns the equalizer effect on/off.
Lo G -12– +12 dB
This sets the gain (-12 to +12 dB) for the low-range equalizer
(shelving type).
Lo F 40 Hz–1.5 kHz
This sets the center frequency (40Hz to 1.5 kHz) for the low-range
equalizer (shelving type).
Hi G -12 – +12 dB
This sets the gain (-12 to +12 dB) for the high-range equalizer
(shelving type).
Hi F 500 Hz–18.0 kHz
This sets the center frequency (500 Hz to 18 kHz) for the high-range
equalizer (shelving type).