Roland BR-864 - Manual (Page 182)

182
Troubleshooting
Problems with the memory card
“Unsupported Card!” is displayed
❍ Do you have a compatible (CompactFlash) memory
card inserted in the BR-864?
❍ Is the memory card fully and securely inserted?
Synchronization problems
(Cannot synchronize)
When using MTC to synchronize the BR-864 with a MIDI
sequencer, the BR-864 must be the master device.
❍ Is the MIDI cable connected correctly?
❍ Is the MIDI cable broken?
❍ Has the sync generator been set to the desired
synchronization procedure (MTC or MIDI Clock)?
(p. 142)
❍ If you are synchronizing with MTC, has the other
device been set to the same MTC type? (p. 142)
❍ Has the MIDI sequencer been set correctly?
❍ Is the MIDI sequencer ready to play back?
❍ Does the other device support the MMC commands of
the BR-864?
Synchronization with the rhythm
machine is lost
❍ Is the connected rhythm machine receiving Song
Position Pointer?
Certain rhythm machines are unable to receive Song
Position Pointer while in Pattern mode.
Check the MIDI implementation for the rhythm machine
you are using.
Problems with USB
Idling screen not displayed
❍ Is the USB cable properly connected?
❍ Is your computer's operating system compatible with
the BR-864?
Windows: Windows Me/2000 or later
Macintosh: Mac OS 9.1 or later
Other problems
Memory card data was damaged
If memory card data has been damaged, the following causes
are possible. Please initialize the card once again (p. 149).
❍ Was the power turned off while the recorder was
operating?
❍ Was a strong physical shock applied to the memory
card?
❍ Could the power have been turned off while the
memory card was being accessed?
❍ Was the card initialized on a PC or digital camera?