Roland AT90S - Manual (Page 139)

137
Chapter 7 Recording/Playing Back What You Play
Erasing a Performance Song
(Song Clear)
If you wish to discard your recording and re-record from the
beginning, or if you wish to record a new performance, you
must erase the previously-recorded data.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04_50
2. Touch <Utility>.
The Utility screen appears.
3. Touch <Song Clear>.
The following message, asking you to confirm your
choice, will be displayed.
fig.E-62
If you touch <Cancel>, the performance data will not be
erased, and you will return to the Rec/Play screen.
4. If you touch <OK>, the performance data will be
erased.
Changing the Name of a
Performance Song (Rename)
A name is automatically assigned to a performance song that
you record. However, at some point you may wish to change
the name to something more meaningful.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04_50
2. Touch <Utility>.
The Utility screen appears.
fig.07-22_50
3. Touch <Save>.
The Song Save/Song Delete screen appears.
fig.07-23
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence