Roland AT90S - Manual (Page 35)

33
Chapter 1 Selecting and Playing Sounds
5.
Touch < > to stop playback of the demo song.
6.
Press the [Demo] button to exit the demonstration screen.
If the following screen appears
If the performance song in the unit has not been saved to floppy disk, the
following message appears, and it will not be possible to play the Demo
songs.
fig.E-62
1.
If you want to delete the performance data, touch <OK>.
If you do not want to delete the performance data, touch <Cancel>.
You can also play/stop the
demo song by pressing the
Composer [Play/Stop]
button.
The performance data can
be saved on a floppy disk.
If you wish to save the
musical data to a floppy
disk, refer to
“Saving
Performance Songs Onto
Floppy Disk” (p. 139).
NOTE
All rights reserved.
Unauthorized use of this
material for purposes other
than private, personal
enjoyment is a violation of
applicable laws.
NOTE
The data for the Demo song
that is being played is not
available at the MIDI Out
connector.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence