Roland AT90S - Manual (Page 53)

51
Chapter 1 Selecting and Playing Sounds
3.
Touch the part display of the part whose Octave Shift
settings you wish to change.
fig.01-30.eps
4.
Touch < >< > to adjust the settings.
The value can be set to a range of +/- 3 octaves.
fig.01-30.eps
5.
Touch <Exit>.
You will return to the Upper Kbd (Upper keyboard)/Lower Kbd (Lower
keyboard)/Pedalboard screen.
When the power is turned
on, the Octave Shift setting
for each part of the Pedal
Bass will be set to -1 (1
octave down). If you turn
on the [Octave Up] button,
the Octave Shift will be
automatically set to “0”
regardless of the previous
setting. When you turn off
the [Octave Up] button, the
Octave Shift will always
return to “-1” regardless of
the previous setting.
NOTE
Please note that when you
apply the Octave Shift
function to certain voices,
their pitch could be
stretched beyond their
recommended note ranges,
and they may not sound as
expected. Care should be
taken when using Octave
Shift.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence